People prefer them over chemicals as they destroy the mould as effectively as chemicals do and there is no health risk linked with them as it is with chemical mould removers. Some very effective natural mould removers are: 1. It is usually available in the laundry section of most supermarkets. Vinegar is found in almost every house. Grapefruit Seed extract: They work just the same way as tea tree oil do with the only difference that they do not leave any bad odor. Vinegar: When working with vinegar, always make use of gloves as it is skin irritant. It can be very dangerous and hazardous to people who have little or nil knowledge of using it. Tea Tree oil is easily available at food stores. Chemical mould removers that are very strong and toxic should be handled by professionals only but it can be very costly for you. Moulderizer: It can kill black mould and mildew.

All the above described mould removers are very effective. Spray it directly on the mould and just leave it for several minutes. Now commercially produced mould removers are very useful. They should be handled with great care with children or pets around. They do not contain any bleach and chemical. The best alternative for chemical mould removers are natural mould removers. Wipe out the area and then dry the surface. These can be poisonous and can cause health problems for you and your family members. Shake it well so that the oil gets mixed properly and then spray it on the areas of mould. But as it is said prevention is better than cure so the best way to cure the mould is to prevent it. Do not clean the area after applying mixture as it has a very strong and horrible smell. Borax: Mix one cup of borax with one gallon of water and then use this mixture to scrub the mould off the surface. It can be applied on walls, ceiling, showers, curtains etc.

One point to remember here is that if the point of occurrence of mould due to moisture is not known or fixed, then it can return. Tea Tree Oil: Tea Tree Oil is the crate mould most effective natural mould remover. Just mix two teaspoons of tea tree oil with two cups of water in a spray bottle. It can be little bit expensive but you have to use it in small quantities only. The longer we keep the extract on the mould, the more mould it will destroy. There are mould removers that contain strong and toxic chemicals in it. It is an extremely efficient remover with a pleasant odor. They leave a very strong sour smell for a few hours.

Mix ten drops of grapefruit extract with one cup of water. Due to various complications and health hazards, people today do not prefer using chemical methods. They can kill up to 82 percent of mould spices. It is a natural cleaning product. 4. 5.. There are various techniques for removing mould. It first causes foul smell in the areas where it occurs and then gradually starts decomposing the entire house.Moulds are very hazardous to health. 2. Just pour vinegar into a spray bottle and spray it over the mould. If a mould is allowed to grow then it can produce toxic and dangerous substances. 3

Posted by: plasticwash at 01:42 AM | No Comments | Add Comment
Post contains 566 words, total size 3 kb.